System on Modules
ARM Cortex - NXP QorIQ-Layerscape
ARM Cortex NXP QorIQ-Layerscape

miriac™ MPX-LS1043A

System on Module based on NXP QorIQ LS1043A CPU

miriac™ MPX-LS1043A
New cost effective MPX-2 System on Module form factor, connecting to a standard edge connector (MXM3.0 socket). The miriac™ MPX-LS1043A SoM is based on the NXP QorIQ LS1043A ARM Cortex - QorIQ CPU.
●  up to 4 GB 64-bit DDR4 ECC RAM at 1600 MTps
●  hybrid 32-bit mode to support legacy software
●  temperature sensor
●  All on board supply voltages are monitored by a separate µ-controller.
●  Control of on board voltages and the reset logic offer a wide spectrum of custom functionality, even low level safety functions.
FormfactorMPX-2, 82mm x 62 mm
ArchitectureARM Cortex
CPUNXP QorIQ LS1043A CPU: 4 ARM® Cortex® A53 64 bit cores at up to 1.6 GHz core frequency
System Memoryup to 4 GB 32 Bit DDR4 RAM at 1600 MTps, soldered, ECC optional
Flashup to 2 GB SLC NAND Flash (soldered)
SPI-Flashup to 16 MB SPI Flash
Ethernet- 6x Gb Ethernet
- parallel Ethernet interface:
configurable as 2x RGMII max., IEEE Std. 1588 support
USB 3.03x USB 3.0
SerDes lanesup to 4x SerDes at 10 Gbps,
- up to 3x PCIe 2.0
- 1x SATA 3.0 (6 Gbps)
- 1x QSGMII at 1 Gbps
other I/O Interfacesup to 4x I²C
4x SPI
Timer/PWM unit
1x JTAG (with COP support)
Flash CARD1x SD/eMMC
Software SupportLinux
Microware OS-9
others on request
855605miriac® MPX-LS1043A SoMmiriac MPX-LS1043A System on Module, LS1043A@1.0GHz, up to 2GB 32 Bit DDR ECC RAM, up to 512MB Flash memoryavailable
855914miriac® SBC-LS1043A Starter Kitmiriac® SBC-LS1043A Development Kit for MPX-LS1043A, incl. order# 855605 (1GHz, 2GB DDR4 (32Bit), 512 MB Flash), Carrier Board, Linux BSP, accessoriesavailable
Ask an Expert
Contact Microsys